FWT01 Multifunction Network Tester LAN Ethernet Wire Tracker Finder
Meter Telephone Line Tester
This product is a multi-functional handheld cable testing tool. It
has wide application with reinforced cable types and multiple
functions, which is a necessary testing tool for telecommunication
engineering, wiring engineering and network maintenance personnel.
1. Cable hunting: Directly hunt the cable with RJ11, RJ45 and BNC
terminal and other metal leads through adaptor.When cable is
hunted, there is no need to strip off cable sheath, which is easy
and quick to judge the location of breakpoint in cable.It can
directly hunt cable when weak current equipment is turned on, such
as Ethernet switch, router.
2. Test network cable: It can fully test the line sequence of
network cable, open circuit, short-circuit, miswire, reverse
connection and splitpairs.
3. Test line level, positive and negative polarity.
4. Test the status of telephone line: It can test the working
status of telephone line (idle, ringing, and off-hook) and judge
TIP or RING line.
5. Check lead continuity.
6. Test the connection between network cable and switch port.
7. Battery Low voltage indication
Operating:0~40 C, maximal 80 % relative humidity(non-condensing).
Storage:-10~50 C, maximal 80 % relative humidity(non-condensing,
Anti-explosion rating: IP 40
Distance of emitting signal: >3000m
Safety class:IEC61010 -1 600V CAT III, pollution class II.
Battery: emitter 3 x 1.5V/AA; receiver 6F22/9V (not include the battery for the shipping)
Size: emitter 125mm x 66mm x 30mm; receiver 210mm x 45mm x 23mm
Weight: approx. 95 g for emitter (Without battery); approx. 70 g
for receiver (Without battery)
1 x FWT01R Wire Tracker Receiver(with test lead as the picture)
1 x FWT01T Wire Tracker Transmitter
directly track wire type: RJ45,RJ11
Track other wire through the attachment
Open circuit, short circuit, detection of cable line sequence
Network wire collation
Test device used with UTP (Unshield Twisted Pair) and STP (Shield
twisted Pair) wiring
Tests for open circuits, shorts, miswires, reversals, and split
Allow one person to test T568A, T568B, 10Base-T, and Token Ring
DC level test
DC level test
telephone line test
Identify the state of working telephone line(clear,ringing,busy)
Judge continuty of the cables or wires
Switch port collation
detection switch connected condition
Receiver: 9V 6F22 Battery
Emitter:120mm x66mm x31mm
CE CAT.III 300V
Edited by Lisa Sun