Fixed ultrasonic flowmeter TDS-100F wall-mount flow meter
Is stationary time difference ultrasonic flowmeter flow body could
be water, sea water, or oil, uniform liquid slurry, conduct
electricity or not, corrosive or no corrosive liquid can be
measured. Widely used in industrial field of various liquid flow
metering online, which host is divided into standard wall hanging
type, plate type, hanging type explosion-proof, the use of
different field in order to meet user needs.
Low fixed ultrasonic flowmeter with large planning integrated
circuits CPLD, table process, accuracy is higher.
Price, high reliability, high performance, good applicability, full
display in Chinese.
Day, month and year flow accumulation function, can record run 64
days before the operation, the first 64 months, the first five
years of accumulated flow operation.
On low, the power management function, can record, electricity and
traffic on 64 times before, can be manually or automatically
compensate to reduce flow losses.
Low effectively overcome the wall of the ultrasonic signal
attenuation and rough surface of the pipe to scattering of
ultrasonic signal from surface reduce the energy consumption of
Low overcame a signal to a small amount of sediment, suspended
particles and bubbles, the effect of improved flow measurement
accuracy, especially suitable for pipe flow measurement.
When using a dedicated open hole tool that sensor in the zone
without water supply installation, unique belt roller disassembly,
installation method, does not affect the normal production, at any
time to complete the on-line replacement and maintenance.
Better than ±1%.
±1% of reading at rates >0.6 ft/s (0.2m/s). Assume a fully
developed flow profile.
±0.03 ~ ±105 ft/s
(±0.01 ~ ±30 m/s), bi-directional
LCD with backlight. 2x20 letters.
4x4-key membrane keypad with
English (U.S.) or metric.
Analogue output: 4-20mA or 0-20mA current output. Impedance 0~1kW.
Accuracy 0.1%. .
Isolated OCT output: for frequency output (0~9,999Hz), alarm
driver, or totaliser pulse output, ON/OFF control, etc.
Relay output 1A@125VAC or 2A@30VDC. For ON/OFF control, alarm
driver, totaliser output, etc.
Internal Alarm (Buzzer): user programmable.
External Alarm Driver: alarm signal can be transmitted to Relay or
OCT output terminals to drive an external alarm.
RS-232 serial port.
Five channel 4-20mA current inputs for signals such as temperature,
pressure, liquid level, and etc.. Accuracy 0.1%.
Two of the five input channels are wired to terminal blocks. The
remaining three channels are optional.
Die-cast aluminum enclosure.
Protection Class: IP65 (NEMA 4X).
Size: 9.88x7.56x3.15 (251x192x80mm3) for standard version
S2-type: for pipe size (DN15~DN100mm)
M2-type: for pipe size (DN50~DN700mm)
L2-type: for pipe size (DN300~DN6,000mm)
Virtually all commonly used clean liquids.
Liquids with small quantity of tiny particles may also be
applicable. Particle size should be less than 75um, particle
concentration less than 10,000ppm.
Liquids should contain no or very minor air bubbles.
Examples are chilled/hot water, sea water, waste water, chemical
liquids, oil, crude oil, alcohol, beer, etc.
(0C - 160C) for clamp-on transducer. Higher temperatures can be
accommodated. Consult the manufacturer for assistance.
(0C - 160C) for wetted transducer.
1 ~ 240 (DN25mm ~ DN6,000mm).
All metals, most plastics, fiber glass, etc. Allow pipe liner.
Shielded transducer cable. Standard length 15 (5m). Can be extended
to 1640 (500m). Contact the manufacturer for longer cable
AC: 240V DC: 8VDC~36VDC
Power consumption: < 2W
Standard main unit: 6.6lb (3kg)
Standard S2 type
Standard M2 type
Standard L2 type
Suitable pipe diameter
TDS-100F ultrasonic flow meter 1 set
Clamp Fixture 1 set
Standard M2 transducer 1 pair (transducer S2 and L2 is optional)
2 x 2.5M Connection Cable